squish

英 [skwɪʃ]

美 [skwɪʃ]

v.  (被)压坏，挤坏; 发吧唧声; 发吱嘎声

过去分词：squished　过去式：squished　现在分词：squishing　第三人称单数：squishes　

BNC.48495 / COCA.19433

牛津词典

verb

• （被）压坏，挤坏
  if sth soft squishes or is squished , it is crushed out of shape when it is pressed
• 发吧唧声；发吱嘎声
  to make a soft wet sucking sound

英英释义

noun

• the noise of soft mud being walked on

verb

• put (a liquid) into a container or another place by means of a squirting action
• walk through mud or mire
  1. We had to splosh across the wet meadow
  Synonym:squelchsplashsploshsloshslop

双语例句

• This filter, under the "Filters" menu, allows you to move, smudge, squish, and otherwise distort your image.
  这种过滤器，在“过滤器”菜单，允许您移动，涂抹，果酱，并扭曲的形象。
• As the small and medium sized high-speed direct injection diesel engine needs strong intake swirl, squish compression and combustion turbulence, its intake port generally made spiral or tangential shape.
  对于中小型高速直喷式柴油机，因其需要较强的进气涡流、压缩挤流和燃烧紊流，其进气道一般做成螺旋的或切向的形状。
• The air motion in UCS combustion system is much stronger than that in base combustion system and the strong reversed squish lasts longer in the former than in the latter because the former has a far larger squish area than the latter.
  伞帘喷雾燃烧系统的挤气面积远大于原机，因此前者的空气运动明显强于后者，较强逆挤流维持的时间长于后者。
• The effect of swirl strength on particulate emission at medium speed operating condition was not significant because the squish and expansion swirl generated by piston movement could meet the needs of fuel combustion.
  中速工况气缸内形成的挤气涡流和膨胀涡流基本可以满足燃料燃烧的需求，涡流强度在一定范围内的变化对降低柴油机排气微粒贡献不大。
• And, then we squish all of them up, and that's how we get the contour plot OK, so each of these lines, imagine that this is like some mountain or something that you are hiking on.
  然后把所有等高线聚合到一起，这样就得到了等高线图，对于每一条这些线，想象，你是在爬山或是徒步旅行。
• At the end of compression stroke, the turbulent kinetic energy of flow around the edge of cylinder is weak, while that of squish in the middle is relatively strong.
  压缩上止点附近气缸边缘的湍动能很弱，而气缸中部挤流区域的湍动能则相对很强。
• The effect of squish swirl on conduct channel of piston crown for automotive diesel engine
  车用柴油机活塞顶导向槽的挤压涡流效应
• Gas Skunk: This is not good. It's gonna fall and squish us.
  这不好。它就要倒下并压扁我们了。
• Squish the ellipse to about half the size.
  挤椭圆约一半大小。
• By comparison, straight wall chamber ( type A) is easy to be manufactured, has the lowest thermal stress and has obvious squish. Type A is the best combustion room choice.
  比较而言，直壁ω型燃烧室最易制造，热应力较小，挤流作用明显，为最佳燃烧室方案。